Blog Page

This is one of our recently sold items: Vintage Rabone Chesterman cast steel combination square in good used condition, it’s a must have item for any good tradesman.

This is one of our recently sold items: Vintage Beekeepers smoker an essential tool for any apiarist to safely check their hives. This metal framed wooden smoker works well with its bellows still in good usable condition. However I would recommend this as a display item due to the age of it which would make…

This is one of our recently sold items: Good Eggbeater type hand drill No: 803 by Stanley Tools in good condition although there is some loss to the vanish on the handles, there are some drill bits in a packet in the box that comes with it although its not a full set.

This is one of our recently sold items: Vintage Tecalemit brass automotive grease gun in good used condition.

This is one of our recently sold items: Good bricklayers 11″ trowel made by Brades for W.H.S so will be extremely good quality steel, the blade is that bit thicker than modern types. It cant have seen much use as it still has the original label on the handle.

This is one of our recently sold items: Vintage Goodell Pratt egg beater hand drill with Hollowed out rosewood handle to store drill bits, the top unscrews, This top of the handle has been repaired where it had cracked in half but this is still a nice old drill.

This is one of our recently sold items: Nice Vintage Kayes pie crust oil can in good used condition.

This is one of our recently sold items: Vintage Stanley No: 80 Cabinet Scraper in good used condition.

This is one of our recently sold items: Eleven inch Antique Industrial sign from a Dereham (Norfolk) Maker in refurbished condition bringing out the qualities in the piece, a very unique look.

This is one of our recently sold items: Stanley No.5 Fore Plane in good condition refurbished ready to use.

This is one of our recently sold items: No. 730 was introduced to allow slitting and bevelling of soft insulating board by the use of thin razor blade type cutters. Two cutters positions are provided. A vertical position for slitting and 45° angled position for bevelling. An attachable fence was provided for bevelling work. It…