Vintage Tenon Back Saws

Showing all 2 results

Vintage Spear & Jackson 8” Steel Back Dovetail Saw 12 Tpi – Sharpened Refurbished
£25.00 Add to basket
Vintage Spear & Jackson 10” Steel Back Tenon Saw 14 Tpi – Sharpened Fully Refurbished
£22.00 Add to basket

Vintage Old Saws

Sharp Ready for Use

We have sharpened many 100’s of handsaws from most manufacturers old and new by hand, giving us an insight into what properties each saw possesses.

We joint and sharpen all our handsaws by hand in the old traditional way, time consuming yes but very rewarding knowing that we have breathed new life into each old saw.

Unfortunately many old saws have had numerous attempts at sharpening them with varied degrees of skill during their lifetimes. Invariably this is not good enough for us to follow so we often have to joint them back, in some cases, a total retoothing is required.

Bearing in mind we sharpen saws every day here, on average a typical saw refurbishment can take anything from 1 1/2 hrs – 2 1/2 hrs to complete.

Add to that, occasionally when setting the saws a single tooth can snap and it requires undertaking the whole process again. Unfortunately during this process a tooth cannot be set until a tooth is formed.

By contrast a good saw that is right usually takes approx 30 minutes to freshen up.

Quick Search for Tools

Experienced Dealers of Quality Old Vintage Tools
& Usable Antique Items based in the UK.

Vintage Spear & Jackson 8” Steel Back Dovetail Saw 12 Tpi – Sharpened Refurbished

Vintage Spear & Jackson 10” Steel Back Tenon Saw 14 Tpi – Sharpened Fully Refurbished

Tooltique History

Tooltique Blog Posts

Vintage Tools & Requests

Experienced Dealers of Quality Old Vintage Tools & Usable Antique Items based in the UK.